How To Remove Recessed Lighting Housing

Disclosure: We may become commissions for purchases fabricated through links in this mail.

What'due south your least favorite part nigh new home comeback projects? Ane of ours is worrying most getting rid of what's already at that place. Some of the best examples of this are with lighting. A lot of times when yous want to put a new lite fixture in, there'southward an old, outdated one in your way. This is just as true for recessed lighting equally with whatsoever low-cal fixture. Nosotros accept figured out the best way to remove onetime recessed lighting cans and so that y'all can get it done as easily equally possible!

Removing recessed lighting cans is a adequately piece of cake procedure. It can vary slightly depending on what kind of housing and zipper method the fixtures yous're removing have. Either way, in that location are a few steps to follow to go the job done efficiently:

1. Prepare to remove the old cans.
2. Take out the trim.
3. Remove the tin.
4. Properly have care of the wiring.
5. Figure out what to do with the hole.

Information technology's important to learn how to complete this project in depth. You have to make your safety the priority if you're doing information technology yourself. Information technology's also very helpful to know what exactly goes into a project like this because it tin can help determine if you lot should hire someone to do it. Learning the process will also requite yous an idea of how much that person should be charging you. Make sure that yous go on reading down beneath to learn everything you demand to know for this project.

Steps For Removing Old Recessed Lighting Cans

Having to remove old recessed low-cal cans isn't the worst matter in the world to happen. Of course, that tin can depend on why y'all are removing them. If y'all're removing them because you're placing new recessed lighting of the same size, then it's probably actually a blessing. This means that the electrical is already set for your new lights and you don't take to get a headache figuring that out or pay someone to do it. It's best to break the whole procedure down.

1. Set up To Remove The One-time Cans

The majority of this step is making certain that you accept the proper equipment to do the job safely and dealing with the electricity. It's very important to make sure that you lot shut off the electricity before attempting any work on the lights. It'due south likewise highly recommended that a licensed professional exist hired to at least handle whatever wiring or electrical work.

You shouldn't need likewise many tools to remove the old lite fixtures.  You'll need a ladder to work safely. Even if you have lower ceilings and information technology's just a step ladder. You might also need a flat head screwdriver to help with releasing any of the clips. Gloves and safety goggles are besides practiced ideas in instance any drywall grit or anything falls onto yous while working.

The concluding tool you lot should need is a voltage tester. Apply this to brand sure in that location is absolutely no electricity running to the fixture before you work on it.

Click hither to store for voltage testers on Amazon.

2. Accept Out The Trim

Taking out the old recessed lighting can first requires you to take out the inner part of it, too known equally trim. First, advisedly make sure that it is cool plenty to bear on since this is where the light bulb has been. Then remove the low-cal bulb. Next, use your voltage tester to double-check that you are safe to proceed.

How Do You Remove Old Recessed Lite Housing?

In that location are generally 2 different types of trim: screw-in and spring-loaded. Removing these different kinds requires slightly unlike approaches. For screw-in trim, gently plow it counter-clockwise and it should start to loosen and so release.

With the spring-loaded trim, y'all'll want to use your screwdriver. Identify the screwdriver gently between the trim and the ceiling. Slowly bring the screwdriver down and the trim volition come downward until information technology fully releases. With this step be careful not to damage the ceiling. At that place may also be clamps at the top of the trim that you lot need to press together to fully release it.

3. Remove The Can

Now that the within of the can is exposed, y'all tin can remove the whole thing from the ceiling. You will need the flathead screwdriver over again for this task.

How To Remove Tin Light Housing From Ceiling?

On the walls of the can, there will be iv strips of (unremarkably) black metal. They should stand out. Somewhere on each of these black metal strips should exist a notch. It might be at the bottom of the strips or on them somewhere else.

Identify your screwdriver into this notch, or slot. Gently applying force per unit area should permit that clamp to release. Then you only have to repeat this stride for the other three clamps in the can. Then yous can slowly remove the tin from the ceiling, simply be aware that the wiring is still attached.

4. Properly Take Care Of The Wiring

One time you pull down the old can y'all volition see the wiring. It should exist connected within of a junction box on peak of the fixture or but fastened to the acme. Advisedly remove any electrical tape or untwist any connectors and dissever the wires. Once this is washed you tin can set the old recessed lighting can off to the side to be disposed of properly afterwards on. Now it'due south time to decide how you are going to safely take care of the wiring in the ceiling.

If you plan on placing a new fixture immediately then you tin just leave it for a minute as you go the new lighting can. You'll want to put electrical record over any exposed wiring if you aren't putting a new fixture in right now. Also, make certain the put tape over that billow in the billow box then it cannot be turned on. If you plan on endmost upward the hole you'll want to take the wire safely removed so it's not a danger in the ceiling.

five. Effigy Out What To Do With The Pigsty

If you lot're putting a new recessed lighting can in the identify of the sometime one, then you lot don't have to worry about this. Only install your new low-cal fixture and you're all gear up. If that'due south non the instance, then y'all'll want to fill information technology in. Yous can patch information technology on your own or hire a professional.

How Exercise Y'all Supplant Recessed Lighting Cans?

Replacing your old can is not only an easy procedure but likewise saves y'all from having to deal with taking out the wiring. Once the old lighting can is out you can install the new one. The first stride is to adhere the wiring to the new can. Simply adhere the wiring every bit it was attached to the old tin can and use connectors so that the wires are safely in place. Once the wiring is done you but accept to button the new tin can into the pigsty and the clamps volition actuate and lock it into place.

If the new recessed lighting can is a different size than the old one you volition have to make some adjustments. Do this either by cutting the hole to get in larger or finding a way to fill the gap with a smaller fixture. For the smoothest procedure possible, yous should make the new recessed lighting can the same size as the old 1.

Finishing Touches

Removing old recessed lighting cans isn't an incredibly hard job. This is especially true if y'all are replacing the erstwhile fixture with a new lighting tin. The majority of the problems that tin occur deal with the electric wiring. Yet, it's very important to brand sure this is done correctly for you and your house's safety. In one case you accept the onetime fixtures take out, and the new ones put in, yous can sit dorsum and enjoy your new lighting.

To learn more about recessed lighting brand sure you click on the links below!

How To Reduce Glare From Recessed Lighting

How Far Apart Should Recessed Lighting Exist?

Can You Put Recessed Lighting In A Garage?

How To Remove Recessed Lighting Housing,

Source: https://homedecorbliss.com/how-to-remove-old-recessed-lighting-cans/

Posted by: smithadlyinit.blogspot.com

Share this post